gparr
November 25th, 2005, 04:38 PM
My primary tip is patience. When the wind is blowing, even slightly, if you're patient you will start to get in tune with the wind and be able to pick out the calm moments that always occur. You just have to be ready and then get off as many shots as possible during that calm moment. I shoot as many of my flower shots as I can very early or very late in the day. By very early, I mean at or just after sunrise. The wind is usually calm for a short while until the sun starts to heat the admosphere. I've had considerable success shooting in the very soft light at or after sunset, when the wind also calms. Long shutter speeds though. Unfortunately, too many blooms aren't open until the sun is higher in the sky and you have to resort to patience.
I've also had great success with a trick Don Bevis shared. You can get thin bamboo sticks in bundles for just a couple of dollars at your local nursery. Get the longer ones. I always carry two of them with me and stick them in the ground so that they apply slight pressure to the plant stem. This cuts down considerably on the movement. Don't know where Don learned the trick, but it works.
Some use a tool called a Plamp. See it here (http://www.naturephotographers.net/gs/gswimplamp.html) I've never used one, though have been tempted. The fear I have is that any clamping device will damage the plant. I shoot a lot in the gardens of several neighbors and at the Chicago Botanic Garden and make it a point to never leave any trace of my having been there. In other words, no footprints in the flower beds, no damaged plants, nothing. Don's trick works so well because it steadies the plant without causing any damage. It doesn't always work, but it does so often enough that it's worth hauling the sticks around.
I've also read several threads on other sites where people describe using "tents" to both diffuse the light and to stop the wind. I don't have any links for solid techniques, but will try to find some. It's tempting, though yet another piece of gear to carry.
These days I make heavy use of my 5-in-1 disk for diffusion and reflection. I have the 22-in. Photoflex Multidisc (http://www.bhphotovideo.com/bnh/controller/home?O=breadCrumb&A=search&Q=&ci=6196), which I like a lot. It's excellent for a lot of light control purposes and sometimes serves as a good wind block. There are cheaper ones, but Kevin Sadler talked me into spending more money to get a quality product and I haven't regretted it.
When all else fails, I resort to flash to get the shot. I greatly dislike using flash and only use it when I want a shot and know that it's get it now or never. If I can come back and get the shot at a calmer time without flash, I will. I do use flash on occasion if I feel that the shot needs a little spark of light, but generally not. Flash is always used on a remote cord and diffused in some way, either with the wide-angle diffuser that's built into it, or by shooting through or bouncing it off of my multidisc.
As for shooting technique, a tripod is a must. I have two, but the one I use for flower shots allows me to splay the legs out and get the camera very low and/or allows me to reverse the column (I bought a short column to replace the one that came with the tripod) and hang the camera upside down. I use a ball head with a quick release. I also almost always use a remote release and frequently use mirror lock up. It's amazing how many images I've ruined because I moved the camera by pushing the shutter button or vibration from the mirror cause the slightest blur.
But above all, getting flower shots just requires a lot of patience. Hope all of this rambling helps.
Gary
I've also had great success with a trick Don Bevis shared. You can get thin bamboo sticks in bundles for just a couple of dollars at your local nursery. Get the longer ones. I always carry two of them with me and stick them in the ground so that they apply slight pressure to the plant stem. This cuts down considerably on the movement. Don't know where Don learned the trick, but it works.
Some use a tool called a Plamp. See it here (http://www.naturephotographers.net/gs/gswimplamp.html) I've never used one, though have been tempted. The fear I have is that any clamping device will damage the plant. I shoot a lot in the gardens of several neighbors and at the Chicago Botanic Garden and make it a point to never leave any trace of my having been there. In other words, no footprints in the flower beds, no damaged plants, nothing. Don's trick works so well because it steadies the plant without causing any damage. It doesn't always work, but it does so often enough that it's worth hauling the sticks around.
I've also read several threads on other sites where people describe using "tents" to both diffuse the light and to stop the wind. I don't have any links for solid techniques, but will try to find some. It's tempting, though yet another piece of gear to carry.
These days I make heavy use of my 5-in-1 disk for diffusion and reflection. I have the 22-in. Photoflex Multidisc (http://www.bhphotovideo.com/bnh/controller/home?O=breadCrumb&A=search&Q=&ci=6196), which I like a lot. It's excellent for a lot of light control purposes and sometimes serves as a good wind block. There are cheaper ones, but Kevin Sadler talked me into spending more money to get a quality product and I haven't regretted it.
When all else fails, I resort to flash to get the shot. I greatly dislike using flash and only use it when I want a shot and know that it's get it now or never. If I can come back and get the shot at a calmer time without flash, I will. I do use flash on occasion if I feel that the shot needs a little spark of light, but generally not. Flash is always used on a remote cord and diffused in some way, either with the wide-angle diffuser that's built into it, or by shooting through or bouncing it off of my multidisc.
As for shooting technique, a tripod is a must. I have two, but the one I use for flower shots allows me to splay the legs out and get the camera very low and/or allows me to reverse the column (I bought a short column to replace the one that came with the tripod) and hang the camera upside down. I use a ball head with a quick release. I also almost always use a remote release and frequently use mirror lock up. It's amazing how many images I've ruined because I moved the camera by pushing the shutter button or vibration from the mirror cause the slightest blur.
But above all, getting flower shots just requires a lot of patience. Hope all of this rambling helps.
Gary
wallpaper 2011 alliances in ww1. during
gxr
10-01 03:29 PM
Anyone with Oct 06 or earlier RD still waiting for I-140 approval?
logiclife
08-03 05:25 PM
I worked for a firm for last couple of years and then moved to another firm. Now I want to apply for a Perm process and need the Experience letter. My previous employer has issued me the experience letter without my roles and responsibility:
It was an unprotected word file, so I changed it and incorporated the roles and responsibilty and my self submitted it to my employer; Now i am afraid if they are going to verify it.
1. What is the INS verification process?
2. Do employer can verifty it by Fax?
3. What can happen if INS came to know that everything was fine except the roles and responsibilities was included afterwards?
What you did was creative (in a bad way). Sorta illegal. And sorta forgerish and borderline fraudulent. I am not judging you, I am just telling you how it sounds.
Now, how did you add material to the word document that was already signed? And therin lies the bad part.
Anyways, correspondence between USCIS and employer/lawyer/employee is always thru mail. I dont think they communicate thru faxes.
Now, if for some reason INS (and by the way, its USCIS now) came to know afterwards, then you are in a deep hole because it sounds like fraud. Fraud is grounds of denial of immigration benefits (any benefit, like H1, or GC or citizenship). Besides, roles and responsibilities are not really needed if the letter says that all conditions in labor cert and 140 are still valid and employment is still offered as per labor cert. Then you dont need detailed description of what you are doing. And even if you felt the urge to add that part in your letter, why didnt you just ask them that?
It was an unprotected word file, so I changed it and incorporated the roles and responsibilty and my self submitted it to my employer; Now i am afraid if they are going to verify it.
1. What is the INS verification process?
2. Do employer can verifty it by Fax?
3. What can happen if INS came to know that everything was fine except the roles and responsibilities was included afterwards?
What you did was creative (in a bad way). Sorta illegal. And sorta forgerish and borderline fraudulent. I am not judging you, I am just telling you how it sounds.
Now, how did you add material to the word document that was already signed? And therin lies the bad part.
Anyways, correspondence between USCIS and employer/lawyer/employee is always thru mail. I dont think they communicate thru faxes.
Now, if for some reason INS (and by the way, its USCIS now) came to know afterwards, then you are in a deep hole because it sounds like fraud. Fraud is grounds of denial of immigration benefits (any benefit, like H1, or GC or citizenship). Besides, roles and responsibilities are not really needed if the letter says that all conditions in labor cert and 140 are still valid and employment is still offered as per labor cert. Then you dont need detailed description of what you are doing. And even if you felt the urge to add that part in your letter, why didnt you just ask them that?
2011 house Flags of the Allies WWI
wandmaker
07-12 08:46 PM
Our Current EAD is expiring on 10/01/2008. So we had applied for extension in june. On july 7th our application was approved and today we recieved our EAD cards. I was expecting a one year extension , which is until 10/01/2009. But USCIS send us ead cards that will expire on 01/01/2009.
What should be the course of action here. Do i need to reapply or just contact USCIS and will they be able to fix it? Any body on similiar situation.?
Service center is nebraska
You do not have to reapply, please call USCIS and let them know of this issue. CSR will tell you how to proceed further
What should be the course of action here. Do i need to reapply or just contact USCIS and will they be able to fix it? Any body on similiar situation.?
Service center is nebraska
You do not have to reapply, please call USCIS and let them know of this issue. CSR will tell you how to proceed further
more...
bkarnik
04-20 05:29 PM
I called the CBP office at the nearest international airport and the officer said "As long as they leave the country with in 6 months they are good. I don't have to come to the airport to get it corrected". He did not ask me the I-94 numbers or any thing. He just confirmed they are here on class B2.
So what does the gurus suggest?
When it comes to immigration matters, my mantra is safe than sorry. I would still make the trip to the CBP office and get a date noted on the I-94. This way if you want to extend their stay, etc you will be covered.
So what does the gurus suggest?
When it comes to immigration matters, my mantra is safe than sorry. I would still make the trip to the CBP office and get a date noted on the I-94. This way if you want to extend their stay, etc you will be covered.
wandmaker
01-02 12:57 PM
What is the exact reason for denial? In spite of your education evaluation as well as letter from the Registrar in India they still dont believe Maths was your major?
You should appeal. It can take a few months (4-6) but its not worth letting it go so easily. Try to get a better education evaluation done (try Sheila Danzig, she has helped some folks on immigrationportal.com). Also, ask your attorney why he is confident the appeal will work in your case (ie. what does he plan to present in the appeal that he did not include in the RFE response).
Also, start another LC in parallel if you are about to run out of your 6 years on H1, as a backup (you can get H1 extensions based on this LC while its under appeal, but if the appeal is also ultimately denied, you want to keep your options open)
I was about write the same, good advice.
You should appeal. It can take a few months (4-6) but its not worth letting it go so easily. Try to get a better education evaluation done (try Sheila Danzig, she has helped some folks on immigrationportal.com). Also, ask your attorney why he is confident the appeal will work in your case (ie. what does he plan to present in the appeal that he did not include in the RFE response).
Also, start another LC in parallel if you are about to run out of your 6 years on H1, as a backup (you can get H1 extensions based on this LC while its under appeal, but if the appeal is also ultimately denied, you want to keep your options open)
I was about write the same, good advice.
more...
ssingh92
05-19 01:37 PM
If I assume that every year EB3-India gets 5000 GC-Visa. From 2001 - 2008 Total = 40,000 EB3-India Visas
Is number of applications in 2001 and 2002 is > 40,000.
Its very hard to believe.
Is number of applications in 2001 and 2002 is > 40,000.
Its very hard to believe.
2010 alliances of ww1. alliances in
suresh_la
11-30 12:10 PM
I have Labor (PERM) and I140 approved from my current employer.
can I apply trasfer and extension with new employer.
Advice is highly appreciated.
can I apply trasfer and extension with new employer.
Advice is highly appreciated.
more...
.jpg/73976971/GasAttack-_WWI_(538x406).jpg "Soldiers escaping the gas")
sameer2730
02-06 05:00 PM
Is H1B stamping subject to the same name checks as in the home country ? Since I have heard people get stuck for long times in these checks, what happens in similar situations when stamping is done in Canada.
hair wallpaper alliances of ww1.
phillyag
05-30 04:43 PM
2. I140 receipt
3. I485 receipt
Would photocopies do for the above 2 docs ?
3. I485 receipt
Would photocopies do for the above 2 docs ?
more...
dixie
09-19 04:06 PM
We should just be asking for relief on waiting times, ability to travel freely, and change jobs.
Unfortunately, this requires a complete overhaul of the immigration system; not minor amendments. For instance, if we want the ability to change jobs freely that is really asking to de-couple the whole H1-B/GC system from our employers. You know very well how things work with current law: EVERYTHING related to our presence in the US; whether that is the work visa, LC or even the PD is OWNED by our employers.
I do agree that increasing visa numbers does not make good PR for our cause.
But the only quick and non-controversial fix (without increasing visa numbers) that I can think of is recapture and ability to file 485 without a visa number.
However, we cannot shy away from explaining how our problems can be solved .. after all average americans have no clue of how their country's immigration system works; if we dont do the explaining the anti-immigrant groups will do that for us with their own interpretation.
Unfortunately, this requires a complete overhaul of the immigration system; not minor amendments. For instance, if we want the ability to change jobs freely that is really asking to de-couple the whole H1-B/GC system from our employers. You know very well how things work with current law: EVERYTHING related to our presence in the US; whether that is the work visa, LC or even the PD is OWNED by our employers.
I do agree that increasing visa numbers does not make good PR for our cause.
But the only quick and non-controversial fix (without increasing visa numbers) that I can think of is recapture and ability to file 485 without a visa number.
However, we cannot shy away from explaining how our problems can be solved .. after all average americans have no clue of how their country's immigration system works; if we dont do the explaining the anti-immigrant groups will do that for us with their own interpretation.
hot FLAGS OF THE ALLIES AT THE
gcdreamer05
08-05 05:11 PM
Guys n Girls,
I would like to listen to your views or experience in this matter. As we know, the employer is now required to pay for all fees associated with filing a labor certification (first step in the GC application). Is it legit for the employer to engage the employee in a contract that requires the employee to reimburse all immigration related fees (including the labor cert fee) to the employer if the employee quits the company when the GC petition is pending?
I guess DOL wants the employer to pay for the labor cert fee. Is it ok for the employer to get it back, say a year later, when the employee quits the company, which in sense would mean that the employee ended up paying for the labor cert.
Comments please.
Thanks!
that is totally illegal and if it happens and if someone complains to DOL then the employer will be in "Lake Soup"
I would like to listen to your views or experience in this matter. As we know, the employer is now required to pay for all fees associated with filing a labor certification (first step in the GC application). Is it legit for the employer to engage the employee in a contract that requires the employee to reimburse all immigration related fees (including the labor cert fee) to the employer if the employee quits the company when the GC petition is pending?
I guess DOL wants the employer to pay for the labor cert fee. Is it ok for the employer to get it back, say a year later, when the employee quits the company, which in sense would mean that the employee ended up paying for the labor cert.
Comments please.
Thanks!
that is totally illegal and if it happens and if someone complains to DOL then the employer will be in "Lake Soup"
more...
house alliances in world war 1.
tonyHK12
01-21 11:35 AM
I had a doctor's appointment today and my doc asked if I had read this article: Why Chinese Mothers Are Superior - WSJ.com (http://online.wsj.com/article/SB10001424052748704111504576059713528698754.html) and if I agreed with the author (coming from an asian/indian family)
What do you think?
This is a Good one, defenitely a useful point:
"Not allowed to not be.... the No. 1 student in every subject except gym and drama"
"almost 70% of the Western mothers said either that "stressing academic success is not good for children" or that "parents need to foster the idea that learning is fun."
What do you think?
This is a Good one, defenitely a useful point:
"Not allowed to not be.... the No. 1 student in every subject except gym and drama"
"almost 70% of the Western mothers said either that "stressing academic success is not good for children" or that "parents need to foster the idea that learning is fun."
tattoo ww1. wallpaper WW1 Allies
ivar
02-07 09:46 AM
IVAR congratulations once again to you and your family, enjoy the green and free life to the fullest now.
Teddy,
Thanks for all your support, you are doing a great job by keeping the predictions thread alive, it gives lot of hope to everyone and encourages to hang on. I wish everyone will get there soon.
Teddy,
Thanks for all your support, you are doing a great job by keeping the predictions thread alive, it gives lot of hope to everyone and encourages to hang on. I wish everyone will get there soon.
more...
pictures Cross Made of Allies Flags WWI
pappu
11-21 06:49 AM
Should we mail paulmcd@cmp.com (Paul McDougall )of information Week.
See: http://www.informationweek.com/news/showArticle.jhtml?articleID=194700008&subSection=All+Stories
sure. send it.
The article says---
"A lobby group backed by IBM, Microsoft, Intel, and other tech industry giants is urging Congress to pass a new research and development tax credit and increase the supply of H1-B immigrant visas before the current session adjourns."
H1B visa is not an immigrant visa. It is a non immigrant visa. Everybody confuses H1B visa as the immigrant high skilled visas (Gcs). Moreover this article has no mention of greencards.
Gcs are not part of their agenda as per their website-- http://www.itaa.org/policy/immigration/
We will be neglected and our voice will not be heard if we dont do anything. IV core is working hard but they cannot do it alone without the help from each and every member. Each IV member is important to our success. We cannot afford to leave it to others to do it for us. The collective muscle of our efforts will create miracles for us. I see from a total of 450+ members that logged in yesterday only 12 people sent emails to 60 min. This kind of response to calls for action will not help our cause. Same goes for the state chapters. How many of us have actually gone to the state chapter thread and signed up? Pls. ask this yourself before posting new messages on the forum.
See: http://www.informationweek.com/news/showArticle.jhtml?articleID=194700008&subSection=All+Stories
sure. send it.
The article says---
"A lobby group backed by IBM, Microsoft, Intel, and other tech industry giants is urging Congress to pass a new research and development tax credit and increase the supply of H1-B immigrant visas before the current session adjourns."
H1B visa is not an immigrant visa. It is a non immigrant visa. Everybody confuses H1B visa as the immigrant high skilled visas (Gcs). Moreover this article has no mention of greencards.
Gcs are not part of their agenda as per their website-- http://www.itaa.org/policy/immigration/
We will be neglected and our voice will not be heard if we dont do anything. IV core is working hard but they cannot do it alone without the help from each and every member. Each IV member is important to our success. We cannot afford to leave it to others to do it for us. The collective muscle of our efforts will create miracles for us. I see from a total of 450+ members that logged in yesterday only 12 people sent emails to 60 min. This kind of response to calls for action will not help our cause. Same goes for the state chapters. How many of us have actually gone to the state chapter thread and signed up? Pls. ask this yourself before posting new messages on the forum.
dresses hot alliances Wwi worldmisin
anandrajesh
12-26 09:14 AM
I'll be there. 9 CST works fine for me.
more...
makeup Soldiers escaping the gas
sekasi
11-30 02:16 AM
I think I misread the OP about moving from the flash IDE to flex builder although I strongly prefer both FD and FDT to flex builder..
and no Jeff, it wasn't directed at you although I'm sure you have no idea what you're talking about either :P
and no Jeff, it wasn't directed at you although I'm sure you have no idea what you're talking about either :P
girlfriend 1. alliances of ww1.
admin
04-08 09:22 AM
I have changed the title of this thread to make it less controversial.
hairstyles Allies+in+ww1
bobzibub
02-25 11:28 PM
Oracle applications, Oracle financials, Siebel, SAP are good fields to enter. Data warehousing is hot and a lot of people get trained. Consulting companies have fulltime trainers and there are a lot of courses you can take.
These are good end points. Start a little more basic to get good underpinnings.
I think, also, that if you don't know what you want to do, go for a BSc. in computer sci. If you do, take specific courses.
For system Admin, I'd recommend Redhat.com's courses. The world is going Linux. Play with it and mess it up. Re-install. All part of the fun. Hack some Bash/Perl scripts.
For coding I'd learn C first. Get good with pointers etc. Then learn Object Orientated PHP or Java. C isn't the easiest of languages, true. If you have problems, fall back to BASIC.
PHP and Java will get you started with web stuff and databases fairly quickly too. Start with Mysql. Then Postgresql. That'll get you ready for Oracle (the database) and you can then learn the applications that run on it.
If you learn the high end apps w/o learning the low end, you're code may be beautifully written but horribly inefficient.
They'll ask why an MBA/HR guy wants to be a grunt. Consider volunteering for an open source project for street cred. sourceforge.net has a bunch of projects.
These are good end points. Start a little more basic to get good underpinnings.
I think, also, that if you don't know what you want to do, go for a BSc. in computer sci. If you do, take specific courses.
For system Admin, I'd recommend Redhat.com's courses. The world is going Linux. Play with it and mess it up. Re-install. All part of the fun. Hack some Bash/Perl scripts.
For coding I'd learn C first. Get good with pointers etc. Then learn Object Orientated PHP or Java. C isn't the easiest of languages, true. If you have problems, fall back to BASIC.
PHP and Java will get you started with web stuff and databases fairly quickly too. Start with Mysql. Then Postgresql. That'll get you ready for Oracle (the database) and you can then learn the applications that run on it.
If you learn the high end apps w/o learning the low end, you're code may be beautifully written but horribly inefficient.
They'll ask why an MBA/HR guy wants to be a grunt. Consider volunteering for an open source project for street cred. sourceforge.net has a bunch of projects.
cox
November 24th, 2005, 08:46 PM
I took two very similar shots of the same flower. This is an Alyssum. The whole cluster is about the size of my index finger! Which treatment do you prefer, the light or dark version?
Light (1DsII, ISO 400, 25mm extension tube, EF 100 Macro, f/9.0, 1/13s)
http://www.dphoto.us/forumphotos/data/1646/Alyssum_C_sm_112405_WY4D0371.jpg
Dark (1DsII, ISO 100, 25mm extension tube, EF 100 Macro, f/2.8, 1/160s)
http://www.dphoto.us/forumphotos/data/1646/Alyssum_C_sm_112405_WY4D0331.jpg
Any comments are appreciated :)
Light (1DsII, ISO 400, 25mm extension tube, EF 100 Macro, f/9.0, 1/13s)
http://www.dphoto.us/forumphotos/data/1646/Alyssum_C_sm_112405_WY4D0371.jpg
Dark (1DsII, ISO 100, 25mm extension tube, EF 100 Macro, f/2.8, 1/160s)
http://www.dphoto.us/forumphotos/data/1646/Alyssum_C_sm_112405_WY4D0331.jpg
Any comments are appreciated :)
rsharma
07-24 06:58 PM
rsharma:
For many of the applications filed during the 2007 "visa-gate" visas are not available to allow USCIS to approve the applications. However, USCIS is in the process of doing what they can to get these applications ready to be approved once a visa becomes available.
So the idea is that for many of these applications USCIS has already decided that they are approvable but for the fact that a visa is not available, and once a visa becomes available, they will approve them. Hence the idea that they are "pre-adjudicated".
Thank you attorney Sauer and all other IV members for replying to my question.
I am little confused at the reply I received from USCIS. They are saying that my application cannot be adjudicated till visa numbers are available.
Do they mean they will not pre adjudicate my case till visa number is available ?
or
Do they mean that pre adjudication is done, but the visa number assignment process (adjudication) will be done once visa number is avalable?
The processing dates are passed my received date and notice date in the processing center where my application is processed.
Please let me know your thoughts.
For many of the applications filed during the 2007 "visa-gate" visas are not available to allow USCIS to approve the applications. However, USCIS is in the process of doing what they can to get these applications ready to be approved once a visa becomes available.
So the idea is that for many of these applications USCIS has already decided that they are approvable but for the fact that a visa is not available, and once a visa becomes available, they will approve them. Hence the idea that they are "pre-adjudicated".
Thank you attorney Sauer and all other IV members for replying to my question.
I am little confused at the reply I received from USCIS. They are saying that my application cannot be adjudicated till visa numbers are available.
Do they mean they will not pre adjudicate my case till visa number is available ?
or
Do they mean that pre adjudication is done, but the visa number assignment process (adjudication) will be done once visa number is avalable?
The processing dates are passed my received date and notice date in the processing center where my application is processed.
Please let me know your thoughts.
No comments:
Post a Comment